Others

RecordingThe picture cannot be recorded.

Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P30)

Is there any memory remaining on the built-in memory or the card?

>Delete the pictures which are not necessary to increase the available memory. (P45)

The recorded picture is whitish.

The picture can become whitish if there is dirt e.g. fingerprints on the lens.

>When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.

The area around where the pictures were taken becomes dark.

Was this picture taken with the flash at the close range when the zoom was near [W] (1k)?

>Zoom in a little, and then take the pictures. (P40)

Was this a picture taken in [PIN HOLE] in Scene Mode?

The recorded picture is too bright or dark.

>Check that the exposure is correctly compensated. (P57)

Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker.

>Set the [MIN. SHTR SPEED] (P99) to slower speed.

2 or 3 pictures are taken at one time.

>Set Auto Bracket (P58), [HI-SPEED BURST] (P68), [FLASH BURST] (P69) in Scene Mode or [BURST] (P100) of the [REC] Mode menu to [OFF].

The subject is not focused properly.

The focus range varies depending on the Recording Mode.

>Set to the proper mode for the distance to the subject.

The subject is beyond the focus range of the camera. (P37)

There is camera shake (jitter) or the subject is moving slightly. (P39)

The auto-focus and other operations are not working normally.

Turn the power on again. If the operations are still not working normally, remove the power and consult the dealer or your nearest service center.

The recorded picture is blurred.The optical image stabilizer is not effective.

>The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures. (P32)

>When taking pictures at a slow shutter speed, use the self-timer. (P56)

Taking pictures using Auto Bracket is not possible.

Is the number of recordable pictures 2 or less?

- 153 -