Panasonic DMC-FP8 Note, Press [MENU/SET] to set, A: Time at the home area, Changing the clock setting, ‚: Cancel without setting the clock

Preparation
Press 2/1 to select the items (year, month,	:
	:
day, hour, minute, display sequence or time
display format), and press 3/4 to set.

A: Time at the home areaB: Time at the travel destination (P87)‚: Cancel without setting the clock.

• Select either [24HRS] or [AM/PM] for the time display format.

•AM/PM is displayed when [AM/PM] is selected.

•When [AM/PM] is selected as the time display format, midnight is displayed as AM 12:00 and noon is displayed as PM 12:00. This display format is common in the US and elsewhere.

Press [MENU/SET] to set.

•After completing the clock settings, turn the camera off. Then turn the camera back on, switch to Recording Mode, and check that the display reflects the settings that were performed.

•When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting” procedure below.

Changing the clock settingSelect [CLOCK SET] in the [REC] or [SETUP] menu, and press 1. (P21)

•It can be changed in steps 5 and 6 to set the clock.

•The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.)

Note

•The clock is displayed when [DISPLAY] is pressed several times during recording.

•You can set the year from 2000 to 2099.

•If the clock is not set, the correct date cannot be printed when you stamp the date on the pictures with [TEXT STAMP] (P115) or order a photo studio to print the pictures.

•If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.

- 19 -