Advanced (Recording pictures)

[BABY1]/[BABY2]

This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual.

It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P115).

∫Birthday/Name setting1Press 3/4 to select [AGE] or [NAME] and then press 1.2Press 3/4 to select [SET] and then press [MENU/SET].3Enter the birthday or name.Birthday: 2/1: Select the items (year/month/day). 3/4: Setting.[MENU/SET]: Exit.
Name:

For details on how to enter characters, read the

 

[TITLE EDIT] section on P113.

•When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].

•If [ON] is selected when the birthday or name has not been registered, the setting screen appears automatically.

4Press [MENU/SET] to finish.∫To cancel [AGE] and [NAME]Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.

Note

•The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).

•If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].

•The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶.

•[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO1600].

•If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the lower left of the screen for about 5 seconds, along with the current date and time.

•If the age is not properly displayed, check the clock and birthday settings.

•The birthday setting and name setting can be reset with [RESET].

•The initial setting for [AF MODE] is [š].

- 66 -