Panasonic DMC-FP8 A B, DEMO, [ON], [OFF], If the, DEMO]), [FORMAT], [LANGUAGE], [AUTO DEMO]:, DEMO [DEMO MODE], [STABILIZER DEMO.], A Amount of jitter, ([STABILIZER DEMO.])

Preparation

[FORMAT]	The built-in memory or card is formatted. Formatting irretrievably
	deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

~[LANGUAGE] Set the language displayed on the screen.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

	Displays the amount of jitter the camera has detected
	([STABILIZER DEMO.])
	The camera’s features are displayed as slide shows. ([AUTO
	DEMO])
	[STABILIZER DEMO.]
	A Amount of jitter
DEMO [DEMO MODE]	B Amount of jitter after correction
	A B
	[AUTO DEMO]:
	[OFF]
	[ON]

•The stabilizer function is switched between [ON] and [OFF] every time [MENU/SET] is pressed during the [STABILIZER DEMO.].

•In Playback Mode, [STABILIZER DEMO.] cannot be displayed.•[STABILIZER DEMO.] is an approximation.•Press [DISPLAY] to close [STABILIZER DEMO.].•[AUTO DEMO] has no TV output capability even when it is in Playback Mode.•Press [MENU/SET] to close [AUTO DEMO].

- 29 -