Panasonic VQT2V46 About the Charge indicator, Charging time, When the Charge indicator flashes

Models: VQT2V46 DMC-FX75

1 36
Download 36 pages 50.35 Kb
Page 15
Image 15

Connect the charger to the electrical outlet.

Disconnect the charger from the

 

electrical socket and detach the battery

90

after charging is completed.

 

About the [CHARGE] indicator

The [CHARGE]

indicator turns on: The [CHARGE] indicator A is turned on and charging will start.

The [CHARGE]

indicator turns off: The [CHARGE] indicator A of the charger will turn off once the charging has completed without any problem.

When the [CHARGE] indicator flashes

The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 oC to 30 oC (50 oF to 86oF).

The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

Charging time

Charging time

Approx. 130 min

 

 

Approximate operating time and number of recordable pictures

Number of recordable pictures

Approx. 360 pictures

Recording time

 

Approx. 180 min

Playback time

 

Approx. 350 min

 

 

Recording conditions by CIPA standard

CIPA is an abbreviation of [Camera & Imaging Products Association].

Normal Picture Mode

Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is on.

Using a Panasonic SD Memory Card (32 MB).

Using the supplied battery.

Starting recording 30 seconds after the camera is turned on. (When the Optical Image Stabilizer function is set to [AUTO].)

Recording once every 30 seconds with full flash every second recording.

Rotating the zoom lever from Tele to Wide or vice versa in every recording.

Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases.

(ENG) VQT2V46 15

Page 15
Image 15
Panasonic VQT2V46, DMC-FX75 About the Charge indicator, Charging time, When the Charge indicator flashes