Advanced (Recording pictures)

2[PARTY]

Select this when you want to take pictures at a wedding reception, an indoor party etc. This allows you to take pictures of people and the background with near real-life brightness.

Technique for Party mode

Open the flash. (You can set to [ ].)

We recommend using a tripod and the self-timer for taking pictures.

We recommend rotating the zoom ring to Wide (1k) and being about 1.5 m (4.92 feet) from the subject when taking pictures.

Note

The initial setting for [AF MODE] is [š].

:[BABY1]/; [BABY2]

This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual.

You can set different birthdays in [BABY1] and [BABY2]. You can then display the ages when playing back the pictures.

Age display setting

To have the age displayed, first set the birthday and then be sure to set [WITH AGE] before taking the pictures.

Birthday setting

1Press 3/4 to select [BIRTHDAY SET.] and then press [MENU/SET].

2Press 2/1 to select items (Year/Month/Day) and then press 3/4 to set them.

If [WITH AGE] is set when the birthday has not been registered, the setting screen appears automatically.

3Press [MENU/SET] to set.

You can also use the front dial to set.

To cancel [AGE]

Set to [WITHOUT AGE] in step 1 of “Birthday setting”.

Note

The age can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).

If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday are set. This means the age cannot be displayed even if camera is set to [WITH AGE] after taking the pictures.

Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes [ISO400].

If the camera is turned on with [BABY1]/[BABY2] set, the age is displayed at the lower left of the screen for about 5 seconds, along with the current date and time.

If the age is not properly displayed, check the clock and birthday settings.

The birthday setting can be reset with [RESET].

The initial setting for [AF MODE] is [š].

VQT1U32 93

Page 93
Image 93
Panasonic DMC-G1K operating instructions Party, BABY1/ BABY2