Panasonic DMC-G1K operating instructions Single picture, Print Settings

Connecting to other equipment

Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].

USB MODE

PLEASE SELECT

THE USB MODE

PC

PictBridge(PTP)

SELECT SET MENU

Note

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (P132).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•HDMI connection is disabled and connection with the USB connection cable will take priority when you connect the USB connection cable while the HDMI mini cable is connected (P125).

Single picture

Press 3 to select [SINGLE PICTURE] and then press [MENU/SET].

PictBridge

SINGLE PICTURE

DPOF PICTURE

SELECT SET MENU

Press 2/1 to select the picture and then press 4.

•The message disappears in about 2 seconds.

PictBridge	100_0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECT	EXIT MENU
PRINT

Press 3/4 to select [PRINT START] and then press [MENU/SET].

•Press [MENU/SET] to cancel printing halfway.

•Disconnect the USB connection cable after printing.

SINGLE PICTURE
PRINT START
	PRINT WITH DATE	OFF
NUM. OF PRINTS		1
	PAPER SIZE
PAGE LAYOUT

CANCEL SELECT SET MENU

Print Settings

Select and set the items both on the screen in step 3 of the “Single picture” procedures.

•When you want to print pictures in a paper size or a layout which is not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.)

SINGLE PICTURE
PRINT START
PRINT WITH DATE		OFF
NUM. OF PRINTS		1
PAPER SIZE
PAGE LAYOUT
CANCEL	SELECT	EXIT MENU

VQT1U32 121