The images below show the difference between vertical and horizontal streaking.

Horizontal Streaks

Vertical streaks

NOTE: Streaks on a copied document commonly appear when the scanner glass or the plastic strip in the automatic document feeder (ADF) is dirty. For information about cleaning the scanner glass and plastic strip in the ADF, see Clean the scanner glass and To clean the plastic strip inside the automatic document feeder, respectively.

Use paper or other print media that is appropriate for the print job, and make sure that you handle and store it properly:

Load the paper print-side down in the input tray. (Many papers have printing and nonprinting sides.)

Make sure that the paper is not wrinkled or curled. Load only clean, wrinkle-free paper into the product.

Plain paper is fine for text documents. For photos, HP Advanced Photo paper is the best choice.

Try using a different paper. Paper that does not accept ink well is also prone to print defects. HP ink and paper are designed to work together.

Store photo paper in its original packaging and inside a resealable plastic bag. Store the paper on a flat surface and in a cool, dry place. Load photo paper only when you are ready to print, and then put the unused paper back in the packaging.

For more information about selecting paper, see Select print media. For more information about loading paper, see Load media.

After trying the preceding guidelines, try printing again. If the issue persists, continue to the next solution.

Solution 3: Wait a short period of time (if possible)

A short period of printer inactivity can clear up some problems. If possible, let the printer sit idle for 40 minutes, and then try printing again.

If the issue persists, continue to the next solution.

Solution 4: Check the print settings

Follow these steps to check the print settings to make sure that they are appropriate for your print job.

Poor print quality and unexpected printouts

79

Page 83
Image 83
HP 4500 - G510a manual Solution 3 Wait a short period of time if possible, Solution 4 Check the print settings