Preparation

}[SCENE MENU]

Set the screen that is displayed when the mode dial is set to ,

, , , and .

[OFF]: The recording screen in the currently selected advanced scene mode (P88) or scene mode (P92) appears.

[AUTO]: The advanced scene mode or scene mode menu screen appears.

x[USB MODE]

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

y[SELECT ON CONNECTION]:

Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

z[PC]:

Set after or before connecting to a PC.

{[PictBridge(PTP)]:

Set after or before connecting to a printer supporting PictBridge.

When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.

When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer Protocol)” communication system.

[FORMAT]

The card is formatted.

Formatting irretrievably deletes all the data so check the data carefully before formatting.

Use a battery with sufficient battery power or the AC adaptor (P132) when formatting. Do not turn the camera off during formatting.

If the card has been formatted on a PC or other equipment, format it on the camera again.

If the card cannot be formatted, consult your nearest Service Center.

For USA assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

34 VQT1U32

Page 34
Image 34
Panasonic DMC-G1K operating instructions Select on Connection, PictBridgePTP, Card is formatted, USB Mode