Panasonic DMC-G1K operating instructions Message Display

Others

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples.

[THIS MEMORY CARD IS LOCKED]

>The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK]. Move the switch back to unlock it. (P24)

[NO VALID PICTURE TO PLAY]

>Record a picture or insert a card with a recorded picture and then play it.

[THIS PICTURE IS PROTECTED]

>Delete the picture after canceling the protect setting. (P114)

[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]

•Pictures not based on the DCF standard cannot be deleted.

>If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P34)

[NO ADDITIONAL SELECTIONS CAN BE MADE]

•The number of pictures, which can be set at one time when [MULTI] has been selected for [DELETE MULTI] (P53) or [FAVORITE] (P111) has been exceeded.

>Reduce the number of pictures set, and then repeat the operation.

•More than 999 favorites have been set.

[CANNOT BE SET ON THIS PICTURE]

•[DPOF PRINT] cannot be set for pictures not based on the DCF standard.

[MEMORY CARD ERROR FORMAT THIS CARD?]

•This card has a format which is not recognized by the camera.

>Format the card again with the camera after saving necessary data on a PC etc. (P34)

[PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY]

•Check that the lens is attached correctly and then turn the camera off and on.

>If the message persists, contact the dealer or your nearest Service Center.

[MEMORY CARD PARAMETER ERROR]

>Use a card compatible with this unit. (P24)

•You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.

[MEMORY CARD ERROR PLEASE CHECK THE CARD]

•An error has occurred accessing the card.

>Insert the card again.

•Or try with a different card.

VQT1U32 141