Recording images (basic)
Checking the Captured Picture (Review)
2 | 1,3,4 |
REVIEW1
EXIT 4 | DELETE |
REVIEW4
1 |
| 8 |
| DELETE |
3
DELETE SINGLE
DELETE THIS PICTURE?
YES NO
SELECT
SET
MULTI/ALL 
After taking a picture, the Auto review (P72) feature will cause the captured picture to be displayed on the LCD monitor for the designated time - 1 or 3 seconds. You may also check the picture using the method described below.
1After taking a picture, press the 4/[REVIEW/SET] button.
•The last captured picture is displayed for about 5 seconds. If you rotate the zoom
lever towards [
], the captured picture is zoomed 4 times (A) and 8 times if you
rotate it once again. You can also change the position with 3/4/2/1.
•You can check the previous or following picture with 2/1.
ªErasing the captured picture during the review
2Press [
].
3When the message [DELETE THIS PICTURE?] is displayed, press 2/1 to select [YES].
4Press the 4/[REVIEW/SET] button.
•The picture is erased.
•Once erased, pictures cannot be recovered.
•Multi images or all images can be deleted. Read pages 58, 59 to operate them.
•Press the shutter button halfway to cancel the review.
•In motion image mode [
], Review feature cannot be used.
28
