Preparation

As the ambient temperature is low (10oC or less), the performance of the batteries will be deteriorated and the available recording/playback time becomes extremely short. This is normal. Alkaline batteries significantly show such tendencies. In such cases, remove the batteries and warm them in your pocket. Take special care not to allow the contacts to come into contact with metal objects or a pocket warmer in your pocket.

If an oil stain or any foreign substance is found on the battery contacts, it could prevent the batteries from making good electrical contact. The available recording/ playback time may become extremely short. Before inserting the batteries, clean the battery contacts with soft, dry cloth.

If any leakage from the batteries is noted, remove the batteries, thoroughly wipe off the battery electrolyte in the battery housing and then insert new batteries or fully charged Ni-MH batteries.

If leaked battery electrolyte contacts your hand or cloth, wash with water. Battery electrolyte may cause loss of sight if it comes in contact with your eyes. In such cases, do not rub at your eyes. Immediately wash your eyes with pure water and consult a doctor.

Ni-MH Batteries (Nickel Metal Hydride) Ni-MH batteries can be used when you charge them with the exclusive charger. However, wrong handling of the batteries may cause leakage, generation of heat, fire or explosion. Please be aware of the following issues:

• If any oxidation or foreign substance is found on the battery contacts, the batteries may not be charged correctly. Clean battery contacts and terminals of the recharger with a soft, dry cloth.

• Newly purchased Ni-MH batteries or those which have not been used for a long period of time may not reach full capacity after one charge. This is a feature of the batteries, not a malfunction. The overall performance will increase after repeating discharge/charge cycles several times.

• Batteries should be used to the point when the camera stops working before recharging. If you charge batteries without discharging enough, it can cause “memory effect”, whereby the overall operating time can be decreased.

• If “memory effect” occur, use the batteries until the camera stops working and then recharge them fully. Repeat the discharge/ charge cycles several times. The capacity of the batteries will be recovered.

Ni-MH batteries will naturally discharge and the capacity will become lower even if they are not in use.

• Once Ni-MH batteries have reached full charge, do not charge them continuously.

• Do not peel off or scratch the covered seal.

• Read the operating instructions for the battery charger.

Ni-MH batteries have a limited life. The capacity of the batteries decreases gradually over time. If available time seems much shorter, the battery life may be expired. Purchase new batteries.

14

VQT0P83

Page 14
Image 14
Panasonic DMC-LZ2GN, DMC-LZ1GN operating instructions Preparation

DMC-LZ2GN, DMC-LZ1GN specifications

The Panasonic DMC-LZ1GN and DMC-LZ2GN are compact digital cameras that signify an important step in the evolution of portable imaging technology. Designed for casual photographers and enthusiasts alike, these models pack a range of features and technologies that enhance photo quality and user experience.

A standout feature of both the DMC-LZ1GN and DMC-LZ2GN is their 6-megapixel resolution, which allows users to capture sharp and detailed images. This resolution is complemented by the cameras' 6x optical zoom, providing flexibility for various shooting scenarios, from close-ups to distant subjects. This powerful zoom capability is complemented by a Leica DC Vario-Elmar lens, known for its high-quality optics and minimal distortion. The lens design ensures that photos retain clarity even in challenging lighting conditions.

The cameras also incorporate Panasonic's Intelligent ISO Control technology, which automatically adjusts the sensitivity settings based on the motion of the subjects within the frame. This results in reduced noise and clearer images, particularly in low-light situations. Additionally, the DMC-LZ1GN and DMC-LZ2GN are equipped with Optical Image Stabilization (OIS), which significantly reduces the risk of blurriness caused by handheld shooting.

Both models feature a large 2.5-inch LCD screen that provides a bright and clear display for composing shots and reviewing images. The screen is designed for easy viewing in various lighting conditions, allowing for a seamless photography experience. Furthermore, the user-friendly interface simplifies navigation through the camera settings and shooting modes, making it accessible for users of all skill levels.

Battery life is another noteworthy characteristic, with both cameras utilizing rechargeable lithium-ion batteries that provide extended shooting time. This is ideal for travelers and event photographers who may not have immediate access to power sources during their outings.

In terms of versatility, the DMC-LZ1GN and DMC-LZ2GN come with several shooting modes, including portrait, landscape, and macro, catering to different photography needs. These modes enhance the user’s ability to capture stunning photos effortlessly, turning novice users into confident shooters.

Overall, the Panasonic DMC-LZ1GN and DMC-LZ2GN are great options for those seeking a compact camera that delivers quality and performance. With their range of features, advanced technologies, and user-friendly design, these models continue to hold appeal for photography enthusiasts who desire convenience without compromising on image quality.