Others
3:The card is not recognised by the PC. (The
•Disconnect the USB connection cable and then connect it again with the card inserted into the camera.
4:The pictures cannot be printed with the camera connected to printers.
•Is the printer supporting PictBridge?
–You cannot print pictures with printers which do not support PictBridge (P87).
•Set [USB MODE] to [PictBridge (PTP)]. (P84)
5:Both ends of the picture recorded by setting the picture size to [HDTV] (1920t1080 pixels) are cut out.
•When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.
•When using the printer with a trimming feature or other feature which cuts out both edges of the pictures, cancel the feature for printing. The feature depends on the printer used.
•Refer to the operating instructions of the printer for details.
∫Others
1:Unreadable language was selected by mistake.
•Press the [MENU] button and select
[ 
] icon on the [ 
SETUP] menu to set the desired language.
3:The lens clicks.
•When brightness has changed due to the zoom or the movement of the camera or other, the lens may click and the picture on the screen may be drastically changed, however, the pictures are not affected.
The sound is caused by automatic adjustment of the aperture.
It is not a malfunction.
4:The clock setting is reset.
•If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again.
•When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.
5:Colours that were actually not around the subject appear on the picture.
•On the camera, colour shift may appear by the characteristic of the lens. This is not a malfunction.
2:The setting for the auto review function is disabled.
•Is the camera in burst mode (P46), auto bracket (P44) or motion image mode
[ 
] (P54), or is [AUDIO REC.] set to [ON]
–In these cases, you cannot set the auto review function in the [SETUP] menu.
100
VQT0P83
