Panasonic DMC-LZ2GN, DMC-LZ1GN operating instructions Access to the built-in memory or the card

Preparation

∫Access to the built-in memory or the card

When pictures are being recorded onto the built-in memory (or the card), the access indication lights red.

2560

5

A: When the built-in memory is used

B: When the card is used

When the access indication lights, pictures are being read or deleted, or the built-in memory (or the card) is formatted, do not:

•turn the camera off.

•remove the batteries or the card (if used).

•shake or impact the camera.

•disconnect the AC adaptor (DMW-AC2;

optional).

(when using the AC adaptor)

The card and the data may be damaged and the camera may not operate normally.

•The built-in memory (about 14 MB) can be used as a temporary memory instead of the card, when the capacity of the card becomes full.

•The data on the built-in memory or the card may be damaged or lost due to electromagnetic wave, static electricity or breakdown of the camera or the card. We recommend storing precious data to the PC or other.

•The access time on the built-in memory may become longer than the access time on the card. (Max. about 7 sec.)

•Do not format the built-in memory or the card with a PC. Please use the camera to format the built-in memory and the card. (P81)

20

VQT0P83