Playback (advanced)
83
VQT0P83
Playing Back Pictures on a TV Screen∫Playing back pictures with the
supplied cable
The procedure for DMC-LZ2 is described
below. In the case of DMC-LZ1, connect
the TV and the [V.OUT] terminal on the
camera with the video cable (supplied).
•Turn the camera and the TV off.
1Connect the AV cable A
(supplied) to the [AVOUT] socket
of the camera.
•Connect the AV cable with the [ ]
mark facing the [1] mark on the
[AVOUT] socket.
•Hold the plug B to push into or pull out.
2Connect the AV cable to the video
input and the audio input sockets
of the TV.
•1 Yellow: to the video input socket
•2 White: to the audio input socket
3Turn the TV on and select external
input.
4Turn the camera on and then set
the mode dial to playback mode
[].
∫Viewing pictures in other countries
When setting [VIDEO OUT] on the
[SETUP] menu, you can view images on
the TV in other countries (regions) which
use the NTSC or PAL system.
∫Playback pictures on TV with SD
Memory Card slot
A recorded SD Memory Card can be
played back on TVs with an SD Memory
Card slot.
If you play back pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture quality
will be better.
(MultiMediaCard may not be played back
on TV with SD Memory Card slot.)
•Do not use any other AV cables
(DMC-LZ2)/video cables (DMC-LZ1)
except the supplied one.
•Only when the mode dial is set to
playback mode [ ], the picture is
displayed on the TV.
•Read the TV operating instructions too.
•Audio playback is in monaural.
(DMC-LZ2 only)
DIGITAL
AV
OUT
DC IN
3V
VQT0P83ENG.book 83 ページ ２００５年３月１日 火曜日 午前１１時２８分