Panasonic DMC-ZS30, DMC-ZS27 owner manual Burst function, 106, Setting Speed Description No

Application (Record)

Burst function

A burst of still pictures can be recorded while the shutter button is pressed fully.

Select [Burst] from the [Rec] menu (→54)

Use cursor button to select the burst setting, and press [MENU/SET]

Setting	Speed	Description	No. of
			pictures
		••The burst speed is adjusted automatically in
		accordance with the movements of people, pets
∗1	Approx. 2 - 10	or other subjects. ([Intelligent Burst mode])	100∗2
		••When a fast-moving subject is recorded, the
	pictures/sec.	frame rate becomes faster and the number
		of pictures that can be recorded in a series is
		restricted to about 10.
		••The subject is brought into focus as far as this
	Approx. 2	is allowed by the burst speed. The pictures are
	pictures/sec.	taken with the burst function while the exposure
		and White Balance are being adjusted.	100∗2
		(However, when the burst function is operating
	Approx. 5	during motion picture recording, the focus is
		fixed to the first picture.)
	pictures/sec.	••The burst speed may be reduced under certain
		recording conditions.
	Approx. 10	••Focus, exposure and White Balance are fixed in	6
	pictures/sec.	the first picture.
		••Focus, exposure and White Balance are fixed in
	40 pictures/sec.	the first picture.	30
		••Note on the picture size setting (→107)
		••Focus, exposure and White Balance are fixed in
	60 pictures/sec.	the first picture.	60
		••The recordable range is reduced.
		••Note on the picture size setting (→107)
		••The burst of still pictures can be recorded even
	Complies with	in low light conditions as the flash is used.
∗3		([Flash Burst])
	recording		5
	conditions	••The focus, exposure, and flash level are all
		fixed to the settings for the first picture.
		••Note on the picture size setting (→107)
[OFF]	—	The burst function is released.	—

∗1 [Intelligent Auto] Mode only

∗2 The number of burst pictures is limited by the picture-taking conditions and the type and/or status of the card used.

∗3 Only in [Program AE], [Aperture-Priority] and [Shutter-Priority] modes

- 106 - VQT4T08