Panasonic DMC-ZS27 Saving your pictures cards and built-in memory, Type of Card Capacity

DMC-ZS30DMC-ZS27

Preparations

Saving your pictures (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory if not.

■■Built-in memory (approx. 12 MB) (approx. 70 MB)

●●You can store only still pictures. DMC-ZS30

●●Pictures may be copied between cards and the built-in memory. (→157) ●●The access time for the built-in memory may be longer than the access time for a

card.

■■Compatible memory cards (optional)

The following SD standard-based cards (Panasonic brand recommended)

Type of Card	Capacity	Notes
SD Memory Cards	8 MB – 2 GB	••Can be used with devices compatible with the
		respective formats.
SDHC Memory Cards	4 GB – 32 GB
		••Before using SDXC Memory Cards, check that
SDXC Memory Cards	48 GB, 64 GB
		your computer and other devices support this type
		of card.
		http://panasonic.net/avc/sdcard/information/SDXC.html

••Use a card of SD Speed “Class 4”∗ or higher for recording motion pictures.

••Only the cards listed on the left with the given capacities are supported.

∗SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by checking the card label or other card related materials.

(Example)

••Latest information: http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)

●●While the camera is accessing the card or built-in memory (for an operation such as picture writing, reading, deleting, or formatting), do not turn off the camera or remove the battery, card, AC adaptor (supplied), AC adaptor (optional), or DC coupler (optional). Do not subject the camera to vibrations, impact, or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again.

●●
Please reformat the card with this camera if it has already been
formatted with a computer or another device. (→66)
●●
If the write-protect switch is set to “LOCK”, the card cannot be used to
record or delete pictures, and it cannot be formatted.
●●
It is recommended that you copy important pictures to your computer
(as electromagnetic waves, static electricity, or faults may cause data	Switch
to be damaged).
- 23 -	VQT4T08