Panasonic DMC-ZS27, DMC-ZS30 owner manual 207, Enter the encryption key and select Set

Wi-Fi

Connecting via a wireless access point

■■When connecting with [Manual Input]

If the wireless access point does not appear, you can directly enter the SSID.

In step (→206), use cursor button to select [Manual Input], and then press [MENU/SET]

Enter the SSID of the wireless access point you are connecting to, then select [Set]

••For details on how to enter characters, refer to “Entering Text” (→114).

Use cursor button to select the network authentication type, and press [MENU/SET]

••For information on network authentication, see the manual of the wireless access point.

Use cursor button to select the encryption type, and press [MENU/SET]

••The type of settings that can be changed may vary depending on the details of network authentication settings.

Network authentication type	Encryption types that can be set
[WPA2-PSK]/[WPA-PSK]	[TKIP]/[AES]
[Common Key]	[WEP]
[Open]	[No Encryption]/[WEP]

(When an option other than [No Encryption] is selected)

Enter the encryption key and select [Set]

●●Check the wireless access points instruction manual and settings when a saving wireless access point.

●●If no connection can be established, the wireless access point’s radio waves may

be too weak. Refer to “Message displays” (→277) and “Q&A Troubleshooting” (→281) for details.

●●Transmission speed may decrease, or may not be usable depending on the environment it is used in.

- 207 - VQT4T08