Panasonic DMC-ZS30, DMC-ZS27 owner manual USB Mode, Output, Viera Link

Basics

Using the [Setup] menu

••For the setting procedures of the menu. (→54)

[USB Mode]

Select communication method for when connecting camera to a computer or printer with USB connection cable (supplied).

Update the GPS assist data. DMC-ZS30

■■Settings

[Select on connection]:

Select communication method each time you connect to a computer or PictBridge- compatible printer.

[PictBridge(PTP)]:

Select when connecting to a PictBridge-compatible printer.

[PC]:

Select when connecting to a computer.

DMC-ZS30

[GPS assist data]:

Select when using this unit to update GPS assist data. (→169)

[Output]

Change the settings to be used when the camera is connected to a TV or other device.

[TV Aspect] (This setting performs when an AV cable (optional) is connected.)

■■Settings: /

[VIERA Link]

Enable automatic linking with other VIERA Link-compatible devices, and operability with a VIERA remote control when connecting via an HDMI micro cable (optional) (→255).

■■Settings

[ON]: Operations may be performed via the remote control of the VIERA Link- compatible device. (Not all operations will be available.)

Operability of the camera’s own buttons will be limited. [OFF]: Operations must be performed via the camera’s own buttons.

- 64 - VQT4T08