GPS/Sensor

Applicable modes:

Sensors (compass/altimeter/barometer) are operated

The direction, altitude, and atmospheric pressure can be measured and recorded in the recorded images.

If compass/altimeter/barometer are operated in the time settings (P27) at the time of purchase, [GPS Setting] will be set to [ON] automatically.

Select [Sensor Settings] on the [GPS/Sensor] menu, and then press [MENU/SET].

Press 3/4 to select [ON], and then press [MENU/SET].

Exit the menu after it is set.

To switch the environment information screen, press [DISP.] several times.

ACompass B Altimeter C Latitude D Longitude

E Time positioning was performed F Barometer

Note

A

B

 

C

 

D

F

E

 

When [GPS Setting] is set to [OFF], the latitude/longitude and positioning timing are not displayed.

They keep working when the power is turned off. If you do not wish the compass/altimeter/ barometer to keep working when the power is turned off, set [Airplane Mode] to [ON]. (P131)

For motion pictures¢, the direction, altitude and atmospheric pressure measured at the start of the recording are recorded.

¢ When recording using [MP4] or [GFS]/[GS] in [AVCHD]

- 121 -

Page 121
Image 121
Panasonic DMCTS4D, DMCTS4K, DMCTS4A, DMC-TS4K owner manual Sensors compass/altimeter/barometer are operated, 121