Recording

Note

Measured depth may not be accurate when pressure is applied to front or rear of this unit by pressing with your hands, etc. In such a case, it is recommended to perform [Depth indicator] again when you get back to the surface.

The display may differ significantly depending on the weather conditions (atmospheric pressure, air temperature), or seawater temperature.

For more accurate depth measurements, we recommend that you perform [Depth indicator] before you dive underwater.

When the unit is wet immediately after coming out of the water, etc., it may not be able to measure atmospheric pressure accurately. For details, read About the measured altitude and atmospheric pressure(P128).

To prevent water leakage, make sure that there are no foreign objects, such as sand, hair, dust, etc., clamped and close the side door all the way until it clicks. Also, read (Important) About the Waterproof/Dustproof and Anti-shock Performance of the Camera(P8) before using the camera.

Dip the camera in fresh water in a shallow container for 10 minutes or less after using it, then wipe the water off with a soft, dry cloth. (P11)

- 75 -

Page 75
Image 75
Panasonic DMCTS4K, DMCTS4D, DMCTS4A, DMC-TS4K owner manual Recording