Panasonic DMCTS4D, DMCTS4K, DMCTS4A, DMC-TS4K owner manual 156

Connecting to other equipment

Turn on the TV and select the input to match the terminal in use. Turn the camera on and then press [(].

Note

•Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the left and right of the pictures.

•Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.

•Output from the HDMI micro cable has priority when both AV cable and HDMI micro cable are connected.

•The connection with the USB connection cable will take priority when you connect the USB connection cable simultaneously with the HDMI micro cable.

•When you play back a picture vertically, it may be blurry.

•When pictures are displayed, they may not be displayed properly depending on the type of TV.

•Audio will be played back as monaural.

•Environment information such as direction, altitude (water depth) and atmospheric pressure is not displayed.

•No sound is output from the camera speakers.

•Read the operating instructions for the TV.

•Before removing a battery, turn the camera off and disconnect the AV cable or HDMI micro cable.

The recorded still pictures can be played back on a TV with an SD Memory Card slot.

•Depending on the TV model, pictures may not be displayed on the full screen.

•Motion pictures recorded with [AVCHD] can be played back on Panasonic TVs (VIERA) with the AVCHD logo mark.

•In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of panorama pictures may not work.

•For cards compatible with playback, refer to the operating instructions of the TV.

- 156 -