GPS/Sensor

Viewing the altimeter log

You can specify the period of the recorded altimeter log to display.

Select [Altimeter] on the [GPS/Sensor] menu, and then press [MENU/ SET].

Press 3/4 to select [Display Log], and then press [MENU/SET].

Press 3/4 to select the recording start date, and press [MENU/SET].

Press 3/4/2/1 to select a date at which to start the period to display, and press [MENU/SET].

It will not be displayed, if the date to start and the date to finish is the same.

About the altitude graph

The altitude graph is displayed with the highest altitude in the log as the upper limit and the lowest altitude as the lower limit.

[W]/[T]

Switches between the 12 hour display and the 48 hour display

2/1

Moves the log left and right

Move the log in units of 3 hours on the 12 hour display.

 

Move the log in units of 12 hours on the 48 hour display.

- 126 -

Page 126
Image 126
Panasonic DMCTS4D, DMCTS4K, DMCTS4A 126, Viewing the altimeter log, About the altitude graph, Moves the log left and right