Recording

Timer Recording (cont’d)

8 Press [ENTER] when all information required is entered.

Your programme setting is stored.

• To set another programme, repeat steps 2 to 8.

• To exit, press [TIMER PROG.].

• If the recording times of two or more programmes overlap, “Overlap” and overlapped programme numbers are displayed. (See pages 51-53.)

9 Press [I/y ON/STANDBY].

The icon will appear on the front panel display and the unit is set to the timer-standby mode.

• Timer Recording will not work when the power is on.

• When power is on, programmes registered for recording in Timer Recording will be automatically cleared after the end time and date have passed.

To stop timer recording in progress, press [STOP C] on the front panel of the unit.

[STOP C] on the remote control is not effective.

Notes

If you have not set the clock, the clock setting window will appear instead of the Timer Programming list at step 1. In this case, press [ENTER]. Then continue from step 4 in “Manual Clock Setting” on page 32 before programming the timer recording.

Press [s / B] to move the cursor in the timer programming list.

50 EN

Page 50
Image 50
Toshiba D-R160SB manual 50 EN, Press Enter when all information required is entered, Press I/y ON/STANDBY