Recording

One-touch Timer Recording (cont’d)

4 Press [REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen.

One-touch Timer Recording will start.

I 0:30

0:30

(Normal Recording) 1:00

8:00 7:30

When the unit reaches the specified time, “Writing to Disc” will appear. It may take awhile to write the data onto a disc and then it will be turned off automatically.

To change the recording length during the One-touch Timer Recording, press [REC I] repeatedly until the desired length appears.

To cancel the One-touch Timer Recording within the specified time, press [STOP C].

“Wait for a moment.” will appear and this operation may take awhile to be completed.

Notes

The remaining recording time will appear on the TV screen during One-touch Timer Recording. Press [DISPLAY] to see it on the TV screen.

The remaining recording time will be displayed on the front panel display during One-touch Timer Recording.

Unlike the timer recording, you can perform the following operations during One-touch Timer Recording.

-Turn off the power.

-Use [REC I] or [STOP C].

You cannot use the pause function during One-touch Timer Recording.

The unit will be turned off automatically under the following conditions.

-No space remains on the disc.

-If a power failure occurs.

When One-touch Timer Recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [I/y ON/STANDBY] to cancel the timer-standby mode to use the unit continuously.

If you want to monitor the programme that you are recording, make sure the device such as a set top box is turned off when it is connected to AV2.

46 EN

Page 46
Image 46
Toshiba D-R160SB manual 46 EN, Recording One-touch Timer Recording cont’d