Toshiba D-R160SB 6, 8, 7

Recording

44 EN

Basic recording (cont’d)

6 Select the desired channel to record using

[PROG. /] or [the Number buttons].

7 Press [REC I] to start recording.

The “I” mark will be displayed for 5 seconds.

To pause the recording, press [PAUSE F]. Press [PAUSE F] or

[REC I] again to resume recording.

8 Press [STOP C] to stop the recording.

P12

I

Notes

• You can change the channel while in the REC pause mode.

• Recording starts immediately and continues until the disc is full or you stop recording.

• If the clock is not set, the date and time space next to title names in the Original or Playlist will be blank.

• You cannot change the recording mode while in the REC or REC pause mode.

• It is possible to record video only in the PAL system.

• If you want to monitor the programme that you are recording, make sure the device such as a set top box is turned off when

it is connected to AV2.

This operation may take awhile to

be completed.

Contents

Main D-R160SB D-R160SB Precautions CAUTION: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Laser Safety Power Supply Declaration of Conformity Connection to Power Mains Cord Important Precautions (contd) Installation Location For safety and optimum performance of this unit: Avoid the Hazards of Electrical Shock and Fire Moisture Condensation Warning About Copyright Maintenance Table of contents Introduction Connections Basic Setup Recording Playback Editing Function Setup Others Features Recording Playback Editing Compatibility Choosing a disc For recording /playback Using different disc types for different purposes DVD disc types For playback only On DVD-R discs L On DVD-RW discs B Marks on DVD video discs 3 12 EN Choosing a disc (contd) Yes No Structure of disc contents Discs and purposes 14 EN Index to parts and controls 15 8*9 1211 101314 123*4567 12 4 53 6 7 8 9 10 11 Rear Panel Page Page Index to parts and controls (contd) Front Panel Display Guide Display message Installing batteries in the remote control About the remote control Preparation of the remote control 1 2 3 Keep in mind the following when using the remote control: Display menu On Screen menu Setup menus 63 14 5 252 3 Page Page Page Connections Connections Recording from a DVD player, VCR or other Audio-Video equipment with a Scart output jack (AV2) Recording from a camcorder or other Audio- Video equipment with no Scart output jack (AV3 or AV4) Using the S-VIDEO OUT or the COMPONENT VIDEO OUTPUT jacks and the ANALOG AUDIO OUT jacks Connecting to external equipment Connections Connections (contd) Digital audio for better sound quality The connections illustrated below are optional for better sound. Connecting a Dolby DigitalTM decoder, DTS decoder or MPEG decoder Connecting to an MD deck or DAT deck After you have completed connections Page Initial setting Channel setting Auto tuning Manual tuning To select a channel To skip a Preset channel Move Setting the clock Auto Clock Setting Manual Clock Setting Page Selecting the TV aspect ratio Page Recording Symbols in this Section Information on DVD recording Information Recording Mode Information on copy control Restrictions on recording Making discs playable in other DVD player (Finalise) Selecting the Recording format Choosing the recording format of a blank disc 1 2 Disc menu will appear. 3 <e.g. VR mode> Format menu will appear. 4 5 8 6 7 Reformatting a disc Setting Auto Chapter Recording Audio Select (XP) Selecting the Sound mode Setting External Input Audio Setting Bilingual Recording Audio Page Basic recording (contd) 6 [PROG. /] or [the Number buttons]. 8 7 The I mark will be displayed for 5 seconds. 1 2 3 One-touch Timer Recording (contd) 4 recording time (30 minutes to 8 hours) appears on the TV screen. 1:00 0:30 (Normal Recording) 8:00 7:30 Wait for a moment. will appear and this operation may take awhile to be completed. 1 In stop mode, press [TIMER PROG.]. 2 3 <e.g. 1st January> 31/01(one month later minus one day) Daily (Everyday) [K / L], then press [B]. 5 [K / L], then press [B]. (Continued) 7 6 8 is entered. 9 Checking, cancelling, or correcting the timer programming information * 5) Press [TIMER PROG.] to exit. 6) Press [I/y ON/STANDBY] to return to the timer standby mode. If the timer programming did not complete correctly PDC (Programme Delivery Control) Hints for Timer Recording The priority of overlapped settings If the starting time is same: If programming has been made at the end of the programming (PROG. 1) currently being recorded: Satellite Link 4) With start time and the recording mode highlighted, press [ENTER]. 5) Set the desired start time using [K / L / { / B]. 6) Select the desired recording mode using [K / L], then press [ENTER]. 7) With To Standby Mode highlighted, press [ENTER] again. Settings for an external equipment 1 2 3 5 4 Recording from an external equipment 1 2 65 2, 3 48 3 4 Page Setting disc protection 1 2 4 3 Finalising discs 1 2 3 Finalising discs (contd) 4 Finalise will start. 5 This operation may take awhile to be completed. Auto finalise 1 2 3 5 4 Page Symbols in this Section Playback Page 5 Playback 6 Basic playback (contd) 8 7 then press [ENTER].