Toshiba D-R160SB manual Setting the clock, Auto Clock Setting, Manual Clock Setting

Basic Setup

Setting the clock

Introduction

Auto Clock Setting

Channel Tuning must be set before setting Auto Clock.

1)In stop mode, press [SETUP].

2)Select “Clock” using [K / L], then press

[ENTER].

Setup

Required Setting

Playback

Display

Recording

Clock

Channel

Disc

Clock menu will appear.

Notes

•If you want to cancel “Auto Clock Setting”, select “OFF” using [K / L] at step 4, and then press [ENTER].

•The default setting of “Auto Clock Setting” is “ON”.

•The clock may set itself automatically after you connect the antenna cable to the unit and plug in the mains cable. In this case, the current time will appear on the front panel display.

•To set the clock automatically, the channel assigned to “P04” must receive the PDC signal.

•The clock cannot be set automatically if you are not receiving a channel in your area that carries a time signal. In this case, set the clock manually.

•Once the auto clock setting is performed, the unit will correct the current time by receiving PDC broadcasts whenever you turn off the unit.

•The unit will correct the current time automatically at 8:00, if the unit power is turned off.

•Between 23:00 and 1:00, the Auto Clock function will not operate even if the unit power is turned off.

Connections Basic Setup Recording

3)Select “Auto Clock Setting” using [K / L], then press [ENTER].

Clock

Clock Setting

Auto Clock Setting ON

Option window will appear.

4)Select “ON” using [K / L], then press [ENTER].

5)Press [SETUP] to exit.

6)Press [I/y ON/STANDBY] to turn off.

The Auto Clock function is activated.

This unit will search for the time only when the power is off. Leave the unit off for several minutes to give it time to set the clock.

Manual Clock Setting

1)In stop mode, press [SETUP].

2)Select “Clock” using [K / L], then press

[ENTER].

Setup

Required Setting

Playback

Display

Recording

Clock

Channel

Disc

Clock menu will appear.

3)Select “Clock Setting” using [K / L], then press [ENTER].

Clock

Clock Setting

Auto Clock Setting ON

Playback

Editing Function Setup Others

Clock Setting menu will appear.

Press [ENTER] again.

Default date will appear.

EN 31