Recording

Timer Recording (cont’d)

4) With start time and the recording mode

Notes

highlighted, press [ENTER].

• If you have not set the clock, the clock setting window will

 

 

 

 

 

 

 

 

 

appear at step 3. Follow step 3 in “Manual Clock Setting”

 

 

 

 

 

 

 

 

 

on page 31.

 

 

 

Satellite Link

 

 

 

 

 

 

 

 

 

 

 

 

 

• You cannot set the End time for the Satellite Link Timer

 

 

 

 

 

 

 

 

 

Recording on this unit.

 

 

 

 

 

 

 

 

 

• Recording picture will be distorted if the copy protection

 

 

 

 

 

 

 

 

 

signal is being detected during Satellite Link Timer

 

 

 

 

Start

Mode

 

 

 

 

 

 

 

 

 

 

Recording.

 

 

 

 

17:30

SP

 

 

 

 

 

 

 

 

 

• When a regular Timer Recording and the Satellite Link

 

 

 

 

To Standby Mode

 

 

 

 

 

 

 

 

 

 

Timer Recording are overlapped:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timer Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Satellite Link

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5) Set the desired start time using [K / L / { / B].

 

 

 

 

 

 

 

 

 

 

 

Actual Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Change the value for the hour using [K / L], then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

confirm with [B].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example 2

 

• Change the value for the minute using [K / L], then

 

 

 

 

 

 

 

 

 

 

 

Timer Recording

 

 

 

 

 

 

 

 

confirm with [B].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Satellite Link

 

 

 

 

 

 

 

 

• The hour can be selected between 0 to 23.

 

 

 

 

 

 

 

 

 

• If you wish to go back to the left, press [{].

 

 

 

 

 

 

 

 

 

 

 

Actual Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6) Select the desired recording mode using

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example 3

 

[K / L], then press [ENTER].

 

 

 

 

 

 

 

 

 

 

 

Timer Recording

 

 

 

 

 

 

 

 

See page 36 for details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Satellite Link

 

 

 

 

 

 

 

 

7) With “To Standby Mode” highlighted, press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Actual Recording

 

 

 

 

 

 

 

 

[ENTER] again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Satellite Link

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start Mode

17:30 SP

To Standby Mode

In a second, the unit will be turned off automatically as it goes into the Satellite Link standby mode.

Until the time you set in “Start”, the clock will appear on the front panel display.

“sat” will appear on the front panel display at the start time.

To cancel the Satellite Link function while in the

Satellite Link standby mode:

Press [I/y ON/STANDBY] to turn on the unit.

To cancel the Satellite Link function while the

Satellite Link Timer Recording is in progress:

Press [STOP C] on the front panel of the unit.

54 EN

Page 54
Image 54
Toshiba D-R160SB manual 54 EN