Toshiba D-R160SB manual Satellite Link, If the recording time is partially overlapped

■If the recording time is partially overlapped:

•The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is complete.

PROG. 1
PROG. 2
Actual	PROG. 2	PROG. 1
recording

The first 30 seconds (approx.) are cut off.

■If the recording time entirely overlaps:

•The shorter timer programming (PROG. 1) is not recorded.

PROG. 1
PROG. 2
Actual	PROG. 2
recording

■Note for DVD recording

•If the recording time of two programmes overlap, or the End time of a programme and the Start time of another is same, the first 30 seconds (approx.) of the subsequent programme are cut off.

■If the End time of the programme currently being recorded and the Start time of the subsequent programme are same:

•If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

PROG. 1

PROG. 2
Actual
recording		PROG. 1	PROG. 2
	The first 30 seconds (approx.) are cut off.*

*If the cut off time exceeds 1 minute, the error number “E40” will appear in the Timer Programming list.

Satellite Link

You can set the unit to start recording whenever it detects the scart control signal from the external tuner.

Preparing for the Satellite Link Timer Recording:

[Preparation of your set top box]

•The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to be turned on when it comes to the time you want to start recording, and off when it comes to the time you want to finish recording. (Refer to the tuner’s manual on how to set the timer.)

•Make sure to turn off the set top box when you finish setting.

[Preparation on this unit]

•Make sure to select the desired Recording mode beforehand.

External tuner (not supplied)

Scart cable (not supplied)

	COMPONENT		AUDIO IN	ANALOG
	VIDEO OUTPUT
IN	S-VIDEO	Y	(AV3)	AUDIO OUT
			L	L	DIGITAL AUDIO OUTPUT
	OUT IN (AV3)
	AV2 (DECODER)				PCM/BITSTREAM
		P /C
OUT
ANTENNA	AV1 (TV)	P /C	R	R COAXIAL

1)Press [SETUP].

2)Select “Recording” using [K / L], then press [ENTER].

3)Select “Satellite Link” using [K / L], then press [ENTER].

Satellite Link window will appear.

Recording

Auto Chapter	10 minutes
Recording Audio Select(XP)	Dolby Digital
Auto Finalise	OFF
Satellite Link
Bilingual Recording Audio	Main
External Input Audio	Stereo

Introduction Connections Basic Setup Recording Playback

Editing Function Setup Others

EN 53