Toshiba D-R160SB manual Connecting to external equipment, AV3RearAV4Front

Using the S-VIDEO OUT or the COMPONENT VIDEO OUTPUT jacks and the ANALOG AUDIO OUT jacks

If your TV has an S-Video or a Component Video input jack, use either an S-Video cable (to connect the S-VIDEO OUT jack) or a Component Video cable (to connect the COMPONENT VIDEO OUTPUT jacks), and an Audio Cable (to connect the ANALOG AUDIO OUT jacks).

-S-Video connection provides the good quality picture.

-Component connection provides the better quality picture.

1)Follow steps 1 and 2 on page 24.

2)Connect S-VIDEO OUT or COMPONENT VIDEO OUTPUT jacks of this unit to the S-Video or Component Video input jacks of your TV. Use a commercially available S-Video cable or Component Video cable.

3)Connect the ANALOG AUDIO OUT jacks of this unit to the analogue Audio input jacks of your TV. Use a commercially available Audio cable.

	Component
S-VIDEO IN	Video IN	AUDIO IN
	Y PB/CB PR/CR

Connecting to external equipment

This unit has four input terminals, AV1, AV2 or AV3 on the rear panel and AV4 on the front panel. Be sure that all the units are off before making connections.

■Recording from a DVD player, VCR or other Audio-Video equipment with a Scart output jack (AV2)

AV output jack

(Scart)

Scart cable (not supplied)

AV2 (DECODER)

	COMPONENT		AUDIO IN	ANALOG
	VIDEO OUTPUT
IN	S-VIDEO	Y	(AV3)	AUDIO OUT
	OUT IN (AV3)		L	L DIGITAL AUDIO OUTPUT
	AV2 (DECODER)			PCM/BITSTREAM
		PB/CB
OUT
ANTENNA	AV1 (TV)	PR/CR	R	R COAXIAL

Note

• If the external equipment connected to the AV2 jack

supplies control voltage to this unit via Pin 8 of the Scart

cable, the display functions (e.g. P01) of the remote

control cannot be seen on the TV connected to the AV1.

In this case, turn off the external equipment to prevent

control voltage.

Introduction Connections Basic Setup Recording Playback

S-Video
cable
(not	Component Video
supplied)
	cable (not
	supplied)

Audio

cable

(not supplied)

■Recording from a camcorder or other Audio- Video equipment with no Scart output jack (AV3 or AV4)

AV3(Rear)AV4(Front)

	COMPONENT		IN
	VIDEO OUTPUT
IN	S-VIDEO	Y	AV3)	OUT
			L	L DIGITAL AUDIO OUTPUT
	OUT IN (AV3)
	AV2 (DECODER)			PCM/BITSTREAM
		PB/CB
OUT
ANTENNA	AV1 (TV)	PR/CR	R	R COAXIAL

COMPONENT

VIDEO OUTPUT

S-VIDEO

OUT IN (AV3)

Y

PB/CB

PROGRAM

AUDIO IN	ANALOG
(AV3)	AUDIO OUT
L	L DIGITAL AUDIO OUTPUT	REC
	PCM/BITSTREAM

I /y

ON / STANDBY

Editing

Note for a TV with no S-Video input jack or Scart socket:

•This unit has no RF modulator, so this type of TV cannot be used.

•Only component connection is compatible with the Progressive Scan.

S-Video cable (not supplied)

PR/CR

R COAXIAL

Audio cable

(not supplied)

S-Video

cable (not supplied)

L2 S-VIDEO VIDEO L R

Audio

cable (not

supplied)

Function Setup

S-VIDEO	AUDIO	S-VIDEO	AUDIO
OUT	OUT	OUT	OUT

Change the setup. (See page 55.)

If no S-Video input jack is available, connect to VIDEO input jack on the front panel using an RCA Video cable.

Others

EN 25