Panasonic DMP-B100 Adjusting the LCD screen angle, Preparing the Power Supply

Adjusting the LCD screen angle





AOpen the screen. B Standard

C Free

D Compact

Preparing the Power Supply

Using the unit connected to the AC adaptor

1

To a household

AC outlet

32

AC power supply cord	AC adaptor
(included)
	(included)

The unit is in the standby condition (the [Í] indicator lights) when the AC power supply cord is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

To conserve power

This unit consumes 0.5 W (Approximately 5 W when Quick Start is set to “On”) of power even when turned off. When the unit is not going to be used for a long time, disconnect the AC power supply cord from the household AC outlet.

When moving the unit:

≥Close the LCD screen. Don’t hold by the LCD screen.

About the LCD screen

There may be 0.01 % or less chance of missing or constantly turned on pixels, but this is not a malfunction.

Attention

Do not place the unit with the LCD display-side down when the screen is open.

Doing so may scratch the surface of the LCD and around the LCD.

Using the battery pack

This unit can be used in places without an AC outlet, such as outdoors, by attaching the included battery pack.

≥The battery is not charged at the time of purchase. Charge before initial use.

≥The battery is designed only for use with this unit. It cannot be used with other equipment.

∫Attaching the battery pack

Turn the unit off before attaching or detaching the battery pack.

Bottom side of this unit



RELEASE

DETACHATTACH



RELEASE

DETACHATTACH

Battery pack (included)

VQT2H71

1Bring in from the left, aligning the grooves.

2Slide all the way to the right until you hear a "click". Check to make sure it is securely fastened.

10