Panasonic DMP-BDT330, DMPBDT230 owner manual Setup menu, Video

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus.

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the HOME menu. Please refer to page 19 for details about user registration and switching.

1 Press [HOME].

2 Press [OK] to select “Setup”.

3 Select “Player Settings”.

Player Settings

Video	Picture Mode	Normal
	Picture Adjustment
Audio	HDMI Output

3D

Language

Network

Ratings

System

OK

RETURN

4 Select an item and change the settings.

To exit the screen

Press [HOME].

Video

∫Picture Mode (> 28)

∫Picture Adjustment (> 28)

∫HDMI Output

Press [OK] to show the following settings:

¾HDMI Resolution

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

≥If “Auto” is selected, the best suited output resolution to the connected TV is automatically selected.

≥To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition TV). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible.

¾24p(4K)/24p Output [BDT330]

This setting is for selecting the output method for content recorded in 24p*1, such as movies.

24p(4K)	Outputs signals by upconverting
	them to 4K*2.
24p	Outputs in 24.

≥Connect the compatible TV for each (4K or 1080/24p) output to the HDMI AV OUT MAIN terminal of this unit.

≥“24p(4K)” works only when playing back in 2D.

≥When playing DVD-Video, set this setting to “24p(4K)” or “24p”, and then “24p” in “Video Settings” (> 28) to “On”.

≥When BD-Video/DVD-Video images other than 24p are played, images are output at 60p.

(Continued on the next page.)

Settings

VQT4V26 29