Panasonic DMPBDT230, DMP-BDT330 owner manual Audio, ¾ DTS/DTS-HD

Models: DMP-BDT330 DMPBDT230

1 48
Download 48 pages 21.76 Kb
Page 30
Image 30

¾24p Output [BDT230]

When this unit is connected to a TV supporting 1080/24p output, movies and other material recorded at 24p*1 are output at 24p.

When playing DVD-Video, set to “On” and then set “24p” in “Video Settings” (> 28) to “On”.

When BD-Video/DVD-Video images other than 24p are played, images are output at 60p.

¾HDMI Color Mode

This setting is for selecting color-space conversion of the image signal.

¾Deep Color Output

This setting is for selecting whether to use Deep Color output when a TV that supports Deep Color is connected.

¾Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.

¾HDMI(SUB) Output Mode [BDT330]

Set to output the video from the HDMI AV OUT SUB terminal or not.

*1 A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

*2 A high resolution image/display technology of approximately 4000 (width) k 2000 (height) pixels.

Audio

Dialog Enhancer (> 28)

Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

“Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output

Press [OK] to show the following settings:

¾Dolby D/Dolby D +/Dolby TrueHD

¾DTS/DTS-HD

Select the audio signal to output.

Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

Not making the proper settings may result in noise.

¾BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound). If “Off” is selected, the unit outputs the primary audio only.

¾HDMI Audio Output

This setting selects whether or not to output audio from HDMI.

Select “Off” when the TV is connected to this unit via HDMI AV OUT terminal, and this unit is also connected to other devices, such as an amplifier/receiver via an OPTICAL terminal.

30 VQT4V26

Page 30
Image 30
Panasonic DMPBDT230, DMP-BDT330 owner manual Audio, ¾ DTS/DTS-HD