Panasonic DMR-EH575 operating instructions Others

Changing the unit’s settings

(continued)

Refer to the control reference on page 62.
			Options (Underlined items are the factory presets.)
Tabs		Menus
Connection	AV2 Settings (Set to match the connected equipment.)
(continued)	≥Press [OK] to show the following settings.
		AV2 Input	≥RGB/Video	≥RGB
		Set to “RGB/Video” or “RGB” when receiving or recording	≥Video	≥S Video
		RGB output from external equipment.

AV2 Connection

This setting is fixed with “Ext” if you set “TV System” to “NTSC” (➡ 68).

≥Decoder:When a decoder is connected to descramble the scrambled signals (e.g., C+decoder).

≥Ext: When the VCR or a digital/satellite receiver is connected.

		Ext Link	≥Ext Link 1: When a digital/satellite receiver which transmits a
		This setting cannot be made when the “TV System” is set to		special control signal recordings via the 21-pin Scart
		“NTSC” (➡ 68).		cable is connected.
				Start and stop timings of recording are controlled by
				the control signal.
			≥Ext Link 2: When external equipment with a timer function is
				connected.
				When it turns on, recording starts.
				When it turns off, recording stops.
Others	Remote Control (➡ 25)		≥DVD 1	≥DVD 2	≥DVD 3
	Clock (➡ 69)
	Power Save		≥On: Power consumption is minimized when the unit is turned to
	≥Refer to the following when “Power Save” is set to “On”.		standby (➡ 82).
	–“FL Display” is automatically set to “Automatic” (➡ 65).		≥Off:
	–The “Quick Start” function does not work. (It is automatically
	turned to “Off”.)		(If “Quick Start” is set to “On”, “Power Save” is automatically
	–When the unit is off, Pay TV programmes cannot be watched		turned to “Off”.)
	on the TV because the signal from the connected decoder is
	not looped through. To watch them, turn on the unit.
	Quick Start		≥On
	The Quick Start feature enables this unit to be ready to start		≥Off:	Standby power consumption is less than when this is set
	recording as quick as approx. 1 second§ after turning it on. You			to “On”.
	can start recording soon after deciding you want to record		(If this is set to “On”, “Power Save” is automatically turned to
	something.
	§Only when recording to the HDD or DVD-RAM.		“Off”.)

≥Startup takes up to a minute when:

–You play a disc or start recording to discs other than DVD- RAM.

–You want to make other operations. –The clock has not been set.

DivX Registration

≥You need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➡ 41).

Initialize

≥Press [OK] to show the following settings.

Shipping Condition ≥Yes ≥No

All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.

Default Settings ≥Yes ≥No

All the settings other than the programmed channels, time settings, country settings, language settings, disc language settings, ratings level, ratings password, remote control code, return to the factory presets.

RQT8881

66