Panasonic DMR-EH575 TV System, Press 3, 4 to select the TV system and press OK

While stopped

Press [FUNCTION MENU].

Changing the unit’s settings

Refer to the control reference on page 62.

Auto-Setup Restart

You can restart auto channel setting if set up (➡ 20) fails for some reason.

After performing steps 1–4 (➡ 67)

5 Press [3, 4] to select “Auto-Setup

Restart” or “Download from TV” and press [OK].

The confirmation screen appears.

Select “Download from TV” when you connect the unit to a Q Link compatible TV with a fully wired 21-pin Scart cable. (Programme positions are downloaded from the TV and copied through this convenient function.)

6 Press [2, 1] to select “Yes” and press [OK].

≥If the country setting menu appears on the television Press [3, 4, 2, 1] to select the country and press [OK].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped

Press and hold [X CH] and [CH W] on the main unit until the country setting screen appears.

All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

When the GUIDE Plus+ system setting message appears. ≥If you want to setup the GUIDE Plus+ system

Press [2, 1] to select “Yes” and press [OK]. Go to step 2 on page 21.

≥If you do not want to setup the GUIDE Plus+ system Press [2, 1] to select “No” and press [OK]. Television picture appears. Setup is complete.

List of TV Reception Channels

Channel indication			TV Channel
			Germany/Italy	Other Countries
2	–	4	E2 – E10
5 – 10
				E2 – E12
			E11 – E12
11	–	12	(Germany)
			H1 – H2 (Italy)
13	–	20	A – H (Only Italy)	—
21	–	69	E21 – E69	E21 – E69
74	–	78	S01 – S05	S1 – S5
	80		S1	M1
81	–	89	S2 – S10	M2 – M10
90	–	99	S11 – S20	U1 – U10
121	–	141	S21 – S41§	S21 – S41
			(Hyperband)	(Hyperband)

§Only for 8 MHz channel raster

RQT8881

TV System

Change the setting to match the equipment you are connecting with, or to match the title when there are both PAL and NTSC titles on the HDD.

1

2 Press [3, 4] to select “To Others” and press [OK].

3 Press [3, 4] to select “Setup” and press [OK].

4 Press [3, 4] to select “Connection” and press [1].

5 Press [3, 4] to select “TV System” and press [OK].

Setup	TV System
	PAL
Tuning	NTSC
Disc
Picture
Sound
Display	SELECT
Connection	OK
Others	RETURN

6 Press [3, 4] to select the TV system and press [OK].

≥PAL (factory preset)

–Select when connecting to a PAL or Multi-system television. Titles recorded using NTSC are played as PAL 60.

–Select to record television programmes and PAL input from other equipment.

–[HDD]Select when playing a PAL input title recorded on the HDD.

≥NTSC

–Select when connecting to a NTSC television. Television programmes cannot be recorded properly.

–Select to record NTSC input from other equipment.

–[HDD]Select when playing a NTSC input title recorded on the HDD.

7 Press [2, 1] to select “Yes” and press [OK].

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

∫To change the setting all at once (PAL!#NTSC)

While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit for 5 or more seconds.

[Note]

≥This unit cannot record to discs containing both PAL and NTSC signals. (However, both types of programmes can be recorded onto the HDD.)

≥If “NTSC” has been selected, the GUIDE Plus+ system cannot be used.

68