Still pictures |
| Page |
|
Cannot display Direct Navigator | ≥This screen cannot be displayed during recording or copy or while the unit is standing by for | — |
|
screen. | linked timer recording with external equipment. |
|
|
GUIDE Plus+ |
|
|
|
|
|
|
|
The GUIDE Plus+ System does | ≥Check whether GUIDE Plus+ system setup was performed in full. |
| |
not receive any data. | The GUIDE Plus+ system data is updated several times each day. When the unit is first |
| guide |
| connected, the GUIDE Plus+ system is not yet ready to receive data. |
| |
| It takes approximately 2 hours to complete data download. |
|
|
| Depending on when you set up this unit, it may take approximately one day before you can |
|
|
| display the television programme list. | 69 | Troubleshooting |
| ≥Check whether the clock is properly set. | ||
| ≥If signal quality is bad (ghost images or limited reception), the GUIDE Plus+ system may not | — |
|
| be able to receive any data. |
|
|
“No Data” is displayed for some | ≥These stations may not have been able to be identified automatically. | 22 |
|
or all stations. | For these stations, select the “On” in the sub menu under “Editor” and assign the correct |
|
|
| reference station manually. | — |
|
| ≥Some stations are not supported by the GUIDE Plus+ system. |
| |
|
|
|
|
The GUIDE Plus+ information is | ≥The reference station is not assigned correctly in “Editor”. | 22 |
|
not displayed properly. | Select the correct reference station. |
|
|
| ≥There was a programme change. | — |
|
| Check the current programme, e.g. on the Web site for the GUIDE Plus+ system provider or |
| |
| station provider. |
|
|
The GUIDE Plus+ data transfer | ≥The GUIDE Plus+ system shows the data that was received up to the interruption. | — |
|
was interrupted. | ≥The programme information may be incomplete. | — |
|
|
|
|
|
The GUIDE Plus+ data is not | ≥The unit must be in standby mode in order to update the data. If the unit is in EXT LINK mode | — |
|
updated. | — |
| |
| ≥Make sure that the time is set correctly. |
| |
| ≥Check whether “Off” is set under “Night Download” and change the setting in GUIDE Plus+. | 23 |
|
“No Data” is displayed in the | ≥Programme the Timer recording manually or via SHOWVIEW. | 32 |
|
GUIDE Plus+ system. |
|
|
|
|
|
|
|
VIERA Link |
|
|
|
|
|
|
|
VIERA Link doesn’t work. | ≥Check the HDMI cable connection. Check that “HDMI” is displayed on the front display when | — |
|
| the power for the main unit is set to On. |
|
|
| ≥Make sure that “VIERA Link” is set to “On”. | 65 |
|
| ≥Check the “HDAVI Control” settings on the connected device. | — |
|
| ≥If the connection for the equipment connected with HDMI was changed, or if there was a | — |
|
| power failure or the plug was removed from the household mains socket, “HDAVI Control” |
|
|
| may not work. |
|
|
| In this case, perform the following operations. |
|
|
| 1 When the HDMI cable is connected to all equipment with the power on, turn the TV |
|
|
| (VIERA) on again. |
|
|
| 2 Change the TV (VIERA) settings for the “HDAVI Control” function to off, and then set to on |
|
|
| again. (For more information, see the VIERA operating instructions.) |
|
|
| 3 Switch the VIERA input to HDMI connection with this unit, and after this unit’s screen is |
|
|
| displayed check that “HDAVI Control” is working. |
|
|
To reset this unit |
|
|
|
|
|
|
|
To return all the settings other | ≥Select “Yes” in “Shipping Condition” in the Setup menu. All the settings except for the ratings | 66 |
|
than the main ones to the factory | level, ratings password and time settings return to the factory preset. The timer recording |
|
|
preset | programmes are also cancelled. | 66 |
|
| ≥Select “Yes” in “Default Settings” in the Setup menu. All the settings other than the |
| |
| programmed channels, time settings, country settings, language settings, disc language |
|
|
| settings, ratings level, ratings password, remote control code, return to the factory presets. | — |
|
| ≥Press and hold [X CH] and [CH W] on the main unit until the Country setting screen appears. |
| |
| All the settings except for the ratings level, ratings password and time settings return to the |
|
|
| factory preset. The timer recording programmes are also cancelled. |
|
|
To reset the ratings level | ≥While the disc tray is open, press [DRIVE SELECT] to select the DVD drive, then press and | — |
|
settings | hold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more seconds. |
|
|
|
|
|
|
To restore the unit if it freezes | ≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.) | — |
|
due to one of the safety devices |
|
|
|
being activated |
|
|
|
|
|
|
|
RQT8881
79
