Panasonic DMR-EX77, DMR-EX87 Press 3, 4 to select Auto-Setup Restart and press OK, TV System

Press [3, 4] to select “TV System” and press [OK].

While stopped

Press [FUNCTION MENU].

Changing the unit’s settings

Refer to the control reference on page 64.

Auto-Setup Restart

You can restart auto channel setting for terrestrial digital and analogue channels if set up (➡ 20) fails for some reason.

However, if you perform “Auto-Setup Restart”, the order of analogue channels will change.

After performing steps 1–4 (➡ 69)

5 Press [3, 4] to select “Auto-Setup

Restart” and press [OK].

The confirmation screen appears.

6 Press [2, 1] to select “Yes” and press [OK].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped,

Press and hold [X CH] and [CH W] on the main unit until the

Auto-Setup screen appears.

All the settings except for the ratings level, ratings password and clock settings return to the factory preset. The timer recording programmes are also cancelled.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

List of TV Reception Channels

Tuner	Channel	VHF	UHF	CATV
System	Coverage
PAL–B	Australia	0–12	28–69	45 MHz to
	Analogue			470 MHz
DVB–T	Australia	6–12	27–69	–
	Digital

RQT8859

TV System

Change the setting to match the equipment you are connecting with, or to match the title when there are both PAL and NTSC titles on the HDD.

1

2 Press [3, 4] to select “To Others” and press [OK].

3 Press [3, 4] to select “Setup” and press [OK].

4 Press [3, 4] to select “Connection” and press [1].

5

Setup	TV System
	PAL
Tuning	NTSC
Disc
Picture
Sound
Display	SELECT
Connection	OK
Others	RETURN

6 Press [3, 4] to select the TV system and press [OK].

≥PAL (factory preset)

–Select when connecting to a PAL or Multi-system television. Titles recorded using NTSC are played as PAL 60.

–Select to record television programmes and PAL input from other equipment.

–[HDD]Select when playing a PAL input title recorded on the HDD.

≥NTSC

–Select when connecting to a NTSC television. Television programmes cannot be recorded properly.

–Select to record NTSC input from other equipment.

–[HDD]Select when playing a NTSC input title recorded on the HDD.

7 Press [2, 1] to select “Yes” and press [OK].

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

∫To change the setting all at once (PAL!#NTSC)

While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit simultaneously for 5 or more seconds.

[Note]

≥This unit cannot record NTSC signals to discs that already have PAL signal recordings. (However, both types of programmes can be recorded onto the HDD.)

≥If “NTSC” has been selected, the TV Guide system cannot be used.

72