44
Chapter 4 Adding to the Address Book
Editing Image Box Name
The image box name can be changed.
zFor instructions on how to save Scanned image to an image box, re fer to Scan to the Internal Hard Disk
Drive (see page 14).
zWhen the image data is registered into the image box, image box name can not be cha nged.
1
Press the Function key.
2
Select “Scanner Settings”.
3
Select “20-29” , and then scroll to the
next page using .
4
Select “25 Edit Image Box Name”.
5
Select the desired image box name.
6
Input the new image box name, and
then select “OK”.
zUp to 15 characters.
zFor instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) on the provided CD-ROM.