5. Check the unit
31 Make sure the covering is free of rips or tears.
1 | 2 Make sure there are no obstacles between | |
| the parts of the unit. | |
| 3 Make sure the massage heads are in the | |
| retracted position, i.e. they are parked to the | |
| left and right in the upper part of the backrest. | |
4 | If not retracted, press twice to return the massage heads to the | |
retracted position. | ||
| ||
| 4 Make sure the legrest is lowered. | |
| • Do not sit on the legrest when it is raised. Doing so may cause it to | |
| collapse down or bend the legrest. The legrest is not meant to | |
| support full body weight. | |
| See Caution No. 3, 8 and 13 on page 2 and No. 14 on page 3. | |
6. Flipping up the pillow | ||
| When you flip up the pillow, you can firmly massage your neck | |
| and shoulders. | |
7. Adjusting the reclining angle
1 Press the 
button on the control panel to turn on the power. 2 Press 
and 
to adjust the angle of the backrest and legrest.
•With either button held down, movement will continue until a
•The legrest will start to move shortly after the backrest.
Approx. 115˚
Approx. 85˚
Approx. 160˚
Approx. 0˚
*The reclining operation is a function that adjusts the angle of the backrest and legrest. Avoid using it for any other purposes, such as continuous up/down operation etc.
If the power switch is set to “off” or the power plug is disconnected from the electrical outlet with the massage heads not in the retracted position, the massage heads may automatically return to the retracted position when 
is pressed next time you use the unit.
A display shown to the right may appear, but this is not a malfunction. You will be able to use the unit normally after the massage heads stop moving.
English
16
