Reading the LCD panel when using
Clean
English
During use
The used time is shown.
•The indicators turn off after 5 seconds.
•The shown time returns to [0’00”] after 10 minutes.
After use
The used time and the
remaining battery capacity are shown alternately after turning off the shaver.
Cleaning using the self-cleaning recharger
Preparing the
Remove the shaver and the appliance plug from the
1 Remove the water tank and then open the water tank cap.
When the battery capacity is low
• You can shave 1 to 2 times after “10%”
appears.
(This will differ depending on usage.)
“10%” appears and 
blinks.
•A full charge will supply enough power for approx. 14 shaves of 3 minutes each. (This will differ depending on usage.)
2 Wash away the old cleaning liquid and then rinse the water tank.
3 Pourtank. tap water into the water
• Do not let the water rise above the maximum water line. This may cause the cleaning liquid to spill.
4 Securely close the water tank cap and then attach the tank.
