5 Peel off the 2 seals from the new detergent cartridge.
•Hold the detergent cartridge horizontally. (The detergent may spill if the detergent cartridge is tilted too much.)
|
|
Cleaning the shaver
Use the
1
2 Remove the protective cap and |
English
Precautions for the detergent cartridge
•Keep out of reach of children.
•Only use to clean the blades of electric shavers.
•Carry out emergency measures if the Cleaning agent enters mouth or eyes, and consult a doctor.
6 Attach the detergent cartridge.
•Replace the detergent cartridge when the status lamp is illuminated.
•The expiration date of the cleaning liquid is 6 months after it is opened. If you do not use the cleaning liquid for more than 6 months, throw away the detergent cartridge and the cleaning liquid.
•Only use
•Always change the detergent cartridge and the cleaning liquid in the water tank at the same time. Adding water, or changing just the detergent cartridge or the water, will result in deteriorated cleaning functions.
•If you operate the
then gently insert the shaver as 2 | 3 |
shown. |
|
3 Plug in the AC adaptor into a | 1 |
household outlet. |
|
•Remove any soap or water on the shaver if it has been washed with hand soap or any other detergent.
•Turn the shaver off before inserting.
•Check that the outer foil is not deformed or damaged when you insert the shaver.
•Wipe off any water droplets on the main body rear terminal.
4 Press the SELECT button to select the course.
•The “Charge” course starts when attaching the shaver.
•Each time you press the SELECT button, the course changes from “Clean/Dry/Charge” 
“Dry/Charge” 
“Charge”.
•The courses start approximately 6 seconds after they are selected.
•The course will be aborted if the power is cut off. In this case, perform the course again from the beginning.
•Do not detach the detergent cartridge or the water tank as the cleaning liquid may spill causing a malfunction.
