English

Replacing the inner blades

1.Press the foil frame release buttons and lift the outer foil section upwards.

2.Remove the inner blades one at a time.

Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.

3.Insert the inner blades one at a time until they click.

 

1

2

3

Cleaning the self-cleaning recharger

Beard trimmings may become attached to the cleaning tray of the self-cleaning recharger. Follow the steps below to remove them. We recommend doing this each time you change the detergent cartridge.

1. Be sure to remove the water tank and the appliance plug from the self-cleaning recharger.

Be careful not to spill the cleaning liquid.

Replacement parts

Replacement parts are available at your dealer or Service Center.

Replacement parts for

System outer foil and

WES9030

ESLV81

inner blades

 

 

 

 

 

System outer foil

WES9171

 

 

 

 

Inner blades

WES9170

Detergent cartridge

 

WES035

2.Gently wipe off any beard trimmings attached to the inside of the cleaning tray with a cloth or tissue paper dampened with water.

Clean the corners and uneven parts of the cleaning tray with a cotton swab dampened with water.

Do not pull hard on the rubber blade protector (a) at the bottom of the cleaning tray. The rubber may come off if you pull hard on it. It is only necessary to pull it up slightly.

Warning

Do not wash or apply water to the AC adaptor or self- cleaning recharger. Failure to observe this may cause electric shock or result in short circuits.

12

Page 12
Image 12
Panasonic ES-LV81 operating instructions Cleaning the self-cleaning recharger