•Recommended ambient temperature for charging is 5‑35 °C (41- 95 °F). The battery may not charge properly or not at all under extreme low or high temperatures.
The indicators on the LCD panel blink when there is a problem with charging.
•When charging the shaver for the first time or when it has not been in use for more than 6 months, the indicators on the LCD panel may not glow. It will eventually glow if kept connected.
Shave
Using the shaver
1 Rotate the lock ring to | 2 Hold the shaver |
unlock the power switch | as illustrated |
and press the power | above and shave. |
switch. |
|
Page 5
•We recommend using the shaver in an ambient temperature range of 5 - 35 °C (41 - 95 °F). If used outside this range, the appliance may stop operating.
Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.
Caution
•If you press the power switch for more than 2 seconds, the sonic vibration cleaning mode is activated. Page 11 You cannot shave in this mode.
•Do not place your fingers on the power switch while using the shaver. This may cause the shaver to turn off or enter the sonic vibration cleaning mode. Place your thumb on the thumb rest while using the shaver.
Using the trimmer
You can change the pivot action. Slide the handle up to “
” when using the trimmer.
FREE
You can move the shaver head.
LOCK
You can lock the shaver head.
Slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns.
