2Cleaning your shaver without the self-cleaning recharger

(see fig. 19)

Warning – To prevent electric shock or personal injury, turn the shaver off and disconnect the power cord from the shaver before cleaning with water.

With the system outer foil in place, apply some hand soap onto the outer foil.

Push the On/Off switch more than 2 seconds to activate the turbo mode for “sonic” vibration cleaning.

At the same time, the lamps of the Battery capacity monitor (ES8078, ES8077, ES8076), Low battery indi- cator/Charge status lamp (ES8075) will flash around randomly.

Pour some water over the outer foil. After about 20 seconds, it will be automatically turned off, or you can turn it off by pushing the On/Off switch.

Remove the system outer foil and push the On/Off switch more than 2 seconds to activate the turbo mode for “sonic” vibration cleaning and clean it with running water.

Wipe off any moisture from the shaver with a dry cloth and dry it with- out the system outer foil.

Replacing shaving head components

It is recommended that you replace the system outer foil at least once a year and the inner blade at least once every 2 years to maintain your shav- er’s cutting performance.

Replacing the system outer foil (see fig. 20)

Squeeze the system outer foil release buttons and lift the system outer foil upward to remove it. To insert the new system outer foil, press down until it snaps into place.

Check that the gaps on both sides of the system outer foil release buttons and the system outer foil are equal. If they are not equal, there is a chance that the system outer foil will become detached during use, or shaving capabilities will be deteriorated.

Replacing the inner blades (see fig. 21)

Squeeze the system outer foil release buttons and lift the system outer foil upward to remove it. Re- move the inner blade one at a time by grasping it firmly at both ends and pulling straight away from the shaver. Do not touch the metal parts of inner blades.

To insert the new inner blade, hold the blade one at a time at both ends and press downward until it snaps into the shaver.

ATTENTION:

A Lithium-ion battery that is recy- clable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle the battery.

WARNING for Lithium Battery: Fire, explosion, and severe burn hazard.

Do not crush, disassemble, heat above 100°C (212°F), or incinerate.

How to remove the built-in rechargeable battery before disposal of the shaver

(see fig. 22)

WARNING – Do not attempt to re- place the battery for the purpose of reusing the shaver. This could result in the risk of fire or electric shock.

The battery in this shaver is not in- tended to be replaced by consum- ers. However, the battery may be re- placed at an authorized service center. The procedure described be- low is intended only for removal of the rechargeable battery for the pur- pose of proper disposal.

1.Disconnect the power cord from the shaver when removing the battery.

2.Remove the bottom cover screw

(a).

3.Remove the bottom cover (b).

4.Slide the back panel (c) and re- move it.

5.Remove the housing clip (d).

6.Remove the four housing screws

(e).

7.Remove the housing B (f).

8.Lift the battery (g) and remove it.

Caution – To prevent personal injury or damage to the product,

Do not charge the shaver, where it will be exposed to direct sunlight or a heat source, or where there is a lot of moisture.

Use only the included adaptor RE-7-27 to charge the ES8078/ ES8077/ES8076/ES8075 shaver.

Dry the shaver completely before charging it.

Keep the adaptor away from water and handle it only with dry hands.

Grip the adaptor when disconnect- ing it from an AC outlet; tugging on the power cord may damage it.

Do not pull, twist, or severely bend the power cord.

Do not wrap the power cord tightly around the appliance.

If the power cord gets damaged, it alone cannot be replaced. Contact an authorized service center.

Store the adaptor in a dry area where it will be protected from dam- age.

The shaver and adaptor will be- come slightly hot during use or charging, however this is not a malfunction.

In cases where static noise is emit- ted from the television during use charging or cleaning, connect the adaptor to a different outlet.

Do not touch the edge (metal part) of the inner blade.

Failure to observe this may lead to hand injuries.

14

15

Page 8
Image 8
Panasonic ES8078, ES8075 N operating instructions Replacing shaving head components, Replacing the system outer foil see fig

ES8078, ES8075 N specifications

The Panasonic ES8075 N and ES8078 are two premier electric shavers designed to offer an exceptional grooming experience for men. These models come loaded with cutting-edge features that make them stand out in the crowded market of personal care devices.

One of the main highlights of both the ES8075 N and ES8078 is their advanced three-blade system. This technology allows for a close and precise shave, ensuring that facial hair is efficiently removed in just a single pass. The blades are designed using high-quality stainless steel, promoting durability while maintaining sharpness over time. This mechanism not only cuts hair effectively but also minimizes skin irritation, making it an ideal choice for men with sensitive skin.

These shavers incorporate a flexible pivoting head that adapts to the contours of the face. This enables the device to follow the natural curves of the jawline and neck, providing an even shave without requiring multiple strokes. Additionally, the shavers feature a pop-up trimmer, perfect for detailing sideburns, mustaches, and beard lines, offering versatility for those who like to maintain specific styles.

The Panasonic ES8075 N and ES8078 are designed with user convenience in mind. They come with a built-in LCD display that shows battery level, charging status, and maintenance alerts. This feature ensures users are informed about the shaver's performance and battery life, minimizing any surprises during a grooming session.

Another important characteristic of these electric shavers is their wet and dry functionality. This means they can be used for a traditional dry shave or with shaving foam or gel for enhanced comfort. The waterproof design facilitates easy cleaning under running water, making maintenance a breeze and promoting hygiene.

Both models are powered by a high-performance motor that delivers a fast cutting speed, reducing the amount of time spent on grooming. With a quick charge feature, these shavers can be ready for use in a matter of minutes, ideal for those with busy lifestyles.

Furthermore, their ergonomic design ensures a comfortable grip while shaving, reducing wrist strain. This attention to detail in design and engineering reinforces Panasonic's commitment to quality and user satisfaction.

In summary, the Panasonic ES8075 N and ES8078 electric shavers are robust grooming tools built with innovative technologies that prioritize efficiency, comfort, and versatility. With their advanced blade systems, ergonomic designs, and user-friendly features, these models are excellent choices for men seeking a high-quality grooming experience.