3 DISASSEMBLY INSTRUCTIONS
■BLADE REMOVAL.
Ref. No. 1A | Procedure 1A | Blade removal. | |
|
| NOTE : | |
|
|
| Make sure that the battery pack is removed from the saw prior |
|
|
| to servicing. |
|
|
| The blade will be hot right after cutting. Be sure to let the blade |
|
|
| cool down before removing it. |
|
| 1. | Hold the spindle lock button down. This prevents the blade from |
|
| rotating. | |
|
| 2. | Use the provided hex wrench to loosen the hex bolt. |
|
| NOTE : | |
|
|
| Keep the hex wrench in the storage slot on the body when not |
|
|
| using it. |
|
| 3. | Remove the hex bolt and outer washer. |
|
| 4. | Use the lower guard lift lever to open the lower guard. |
|
| 5. | Carefully remove the blade. |
|
| CAUTION: | |
Be careful to avoid cutting your hands on the blade.
<EY3551>
<EY3552>
3
