Ref. No. 2D | Procedure 2A → 2C → 2D | Removal of the gear box block. |
1. Loosen the 4 screws where securing the driving block with the housing in order to take out the gear box block from the main unit. 2. Remove the 4 screws and carefully open the gear box housing.
NOTE:
The internal parts of gear box block can be removed one after another.
NOTE:
The spring of spindle lock button may pop out.
Ref. No. 2E | Procedure 2A → 2C → 2D → 2E | Assembly of the motor assembly. | |
|
| 1. | Take out the motor rotor assembly from the motor stator. |
|
| 2. | Take out the current case. |
|
| 3. | Remove the 2 screws fastening the motor stator. |
|
| 4. | Take out the stator. |
|
| 5. | Take out the motor brush and switch assembly connected with |
lead wires.
NOTE:
Loosen the 2 housing screws and take the housing C out for re- assembling purpose.
6
