Read the Safety Instructions booklet and the following before using.
I . ADDITIONAL SAFETY RULES
1)Be aware that this tool is always in an operat- ing condition, since it does not have to be plugged into an electrical outlet.
2)When drilling or driving into walls, floors, etc., “live” electrical wires may be encountered.
DO NOT TOUCH THE CHUCK OR ANY FRONT METAL PARTS OF THE TOOL! Hold the tool only by the plastic handle to prevent electric shock in case you drill or drive into a “live” wire.
3)If the bit becomes jammed, immediately turn the main switch off to prevent an overload, which can damage the battery pack or motor. Use reverse motion to loosen jammed bits.
4)Do NOT operate the reversing lever and the main switch is on. The battery will discharge rapidly and damage to the unit may occur.
5)During charging, the charger may become slightly warm. This is normal. Do NOT charge the battery for a long period.
6)Use only a dry, soft cloth to wipe the unit. Do NOT use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
7)When storing or carrying the tool, set the reversing lever to the center position (switch lock).
8)Do not strain the tool by holding the speed control trigger halfway (speed control mode) so that the motor stops.
9)Do not operate the speed selector switch
10)Young children should be supervised to ensure that they do not play with the appli- ance.
11)Wear ear protectors when using the tool for extended periods.
— 6 —
