- 10 -
Preparation
•We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
1Pass the shoulder strap through the hole at the
shoulder strap eyelet.
•Attach the shoulder strap with the "LUMIX" logo facing out.
2Pass the end of the shoulder strap through the
ring in the direction of the arrow and then pass it
through the stopper.
3Pass the end of the shoulder strap through the
hole on the other side of the stopper.
4Pull the other side of the shoulder
strap and then check that it will not
come out.
•Perform steps 1 to 4 and then attach the other
side of the shoulder strap.
•Use the shoulder strap around you r shoulder.
–Do not wrap the strap around your neck.
–It may result in injury or accident.
•Do not leave the shoulder strap where an infant can reach it.
–It may result in an accident by mistakenly wrapping around the neck.
Attaching the Shoulder Strap