- 121 -
Others
•When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the operating instructions for the printer.)
•When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible
to print it correctly.
>Please use a printer that supports panorama pictures.
(For details, refer to the operating instructions for the printer.)
•In the following cases, there is no problem with the camera, so do not worry.
–There is a rattling sound when the camera is shaken while this unit is turned off or during Playback
Mode. (Sound of lens moving)
–This unit makes a rattling sound etc., when this unit is turned on or off, or when switching from
Recording Mode to Playback Mode. (Sound of the aperture)
–Vibration is felt when zooming. (Movement of the lens barrel motor)
–When you hear a clicking or snapping sound from the lens while taking pictures. (The sound of the
aperture adjusting to changes in light levels)
When this occurs, the image on the monitor may appear to change dramatically. However, the
picture is not affected.
•Press [MENU/SET], select the [Setup] menu icon [ ].
Then press [MENU/SET], and then select the [~] icon to set the desired language. (P46)
•In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
•Is [AFAssist Lamp] on the [Rec] menu set to [ON]? (P85)
•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance or
quality of the camera.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others When shaking the camera, there is a rattling sound.
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.