- 112 -
Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[This picture is protected]
•Delete the picture after cancelling the protect setting. (P98)
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•Pictures not based on the DCF standard cannot be deleted.
Perform formatting (P46) on this unit after saving necessary data on a PC, etc.
[Built-in memory full. Please insert memory card.]/[Memory card full]/[Not enough
space on built-in memory]/[Not enough memory on the card]
•There is no space left on the built-in memory or the card.
•When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied
until the capacity of the card becomes full.
[Some pictures cannot be copied]/[Copy could not be completed]
•The following pictures cannot be copied.
–When a picture with the same name as the picture to be copied exists in the copy destination.
(Only when copying from a card to the built-in memory.)
–Pictures not based on the DCF standard.
[Built-In Memory Error]/[Format built-in memory?]
•This message will be displayed when you format the built-in memory on a PC.
Format the built-in memory on the camera again. (P46)
The data on the built-in memory will be deleted.
[Memory card error.
This card cannot be used in this camera.
Format this card?]
•It is a format that cannot be used with this unit.
–Insert a different card and try again.
–Reformat on this unit (P46) after saving necessary data using a PC, etc.
Data will be deleted.
[Please turn camera off and then on again]/[System Error]
•This is displayed when the lens has stopped operating normally due to being pressed on by a hand
etc.
Turn the camera off and on. If the message persists, contact the dealer or Panasonic.